The Lunsford Screw Touch:
- Grade 5 Titanium is roughly a 45% weight savings over steel.
- Always and only domestic Grade 5 (Ti-6Al-4V) Titanium
- Grade 5 fatigue strength is 2x over Grade 2.
- Grade 5 shear strength is 2x over Grade 2.
- Grade 5 tensile strength is 2.5x over Grade 2.
- Grade 5 strength to weight is 2x over Grade 2.
- Grade 5 Titanium is roughly a 45% weight savings over steel.
- Always and only domestic Grade 5 (Ti-6Al-4V) Titanium
- Grade 5 fatigue strength is 2x over Grade 2.
- Grade 5 shear strength is 2x over Grade 2.
- Grade 5 tensile strength is 2.5x over Grade 2.
- Grade 5 strength to weight is 2x over Grade 2.
- Anti-corrosion properties are greater than stainless steel.
- Nano accurate broached head
- This provides a very accurate tool engagement/fitment with the head of the screw making for worry-free threading and unthreading. The broach is crafted in-house allowing us to give you ultra-consistency from screw to screw during the CNC process.
- Nano accurate broached head
- This provides a very accurate tool engagement/fitment with the head of the screw making for worry-free threading and unthreading. The broach is crafted in-house allowing us to give you ultra-consistency from screw to screw during the CNC process.
- Hand-fed thread rolling process
- A very smooth, zero tolerance and bur free thread rolling process aids in the preservation of the parts you are threading into.
- A very smooth, zero tolerance and bur free thread rolling process aids in the preservation of the parts you are threading into.
- Machined from Made in the USA center-less ground titanium.
- From raw material to the finished product, all of our Grade 5 titanium born and bred in the USA.
- Designed, Developed and Crafted right here in Albany, Oregon USA at the Lunsford compound
Total Screw Weight:
24.0 grams
What's Included:
Button Head Screw
3mm x 6mm
2 - Front Axle
3mm x 8mm
2 - Front Bulkhead
2 - Sway Bar Holder
2 - Gear Box Support
4 - Steering Plate
3mm x 10mm
2 - Front Bulkhead
4 - Gear Box
2 - Rear Shock Tower
1 - Servo Arm
3mm x 12mm
1 - Bell Crank
4 - Wing Mount
2 - King Pin Screw, Upper
4 - Rear Hub Link Mount
2 - Lower Shock Mount, Rear
2 - Servo
3mm x 14mm
2 - King Pin Screw, Lower
3mm x 15mm
1 - Gear Box
3mm x 18mm
2 - Lower Shock Mount, Front
3mm x 20mm
2 - Rear Upper Arm Mount
3mm x 22mm
2 - Front Shock Mount, Upper
2 - Rear Shock Tower
3mm x 25mm
2 - Rear Shock Tower with Brace Spacer
Flat Head Screws
3mm x 8mm
3 - Motor Plate
3mm x 10mm
4 - Front Shock Tower
2 - Wing
Motor Screws
3mm x 7mm
2 - Brushless Motor Screws
2 - Aluminum Washers