- Grade 5 Titanium is roughly a 45% weight savings over steel.
- Always and only domestic Grade 5 (Ti-6Al-4V) Titanium
- Grade 5 fatigue strength is 2x over Grade 2.
- Grade 5 shear strength is 2x over Grade 2.
- Grade 5 tensile strength is 2.5x over Grade 2.
- Grade 5 strength to weight is 2x over Grade 2.
- Nano accurate broached head
- This provides a very accurate tool engagement/fitment with the head of the screw making for worry-free threading and unthreading. The broach is crafted in-house allowing us to give you ultra-consistency from screw to screw during the CNC process.
- A very smooth, zero tolerance and bur free thread rolling process aids in the preservation of the parts you are threading into.
- From raw material to the finished product, all of our Grade 5 titanium is born and bred in the USA.
- Designed, developed and crafted right here in Albany, Oregon USA at the Lunsford compound.
Total Screw Kit Weight:
64.8 Grams
Button Head Screws
3mm x 5mm
2 - Wire Routing
3mm x 8mm
1 - Air Filter Hangar
3mm x 10mm
1 - Center Diff Mount Plate
2 - Rear Gear Box Housing
3mm x 12mm
1 - Center Diff Mount Plate
2 - Gear Box Cover, Front
2 - Rear Chassis Brace Mount
2 - Wing Mount
3mm x 14mm
4 - Lower Sway Bar Mounts
4 - Front Body Mount Posts
4 - Front Top Plate
2 - Drag Link
3mm x 16mm
4 - Brake Servo Mount
2 - Gear Box Cover, Front
2 - Rear Shock Tower
4 - Wing Mount Support
3mm x 18mm
1 - Center Diff Mount Plate
2 - Gear Box Cover, Front
3mm x 20mm
2 - Front Camber Link, Inner
1 - Lower Left Shock Mount, Front
2 - Rear Camber Link, Inner
1 - Lower Right Shock Mount, Rear
2 - Wing Mount
4 - Steering Link
3mm x 20mm (Left Hand Thread)
1 - Lower Right Shock Mount, Front
1 - Lower Left Shock Mount, Rear
3mm x 25mm
2 - Front Camber Link, Outer
2 - Rear Camber Link, Outer
3mm x 30mm
1 - Center Diff Mount Plate
2 - Rear Shock Tower
3mm x 40mm
2 - Center Diff Mount Plate
4mm x 12mm
4 - Rear Gear Box Housing
Cap Head Screws
3mm x 10mm
1 - Servo Arm
3mm x 12mm
2 - Fuel Tank
4 - Steering Servo
3mm x 16mm
4 - Engine
2 - Lower Gear Box, Front
4mm x 16mm
2 - Rear Chassis Brace
Flat Head Screws
3mm x 8mm
1 - Clutch Bell
3mm x 10mm
4 - Brake Disk Guides
2 - Front Shock Tower
3mm x 12mm
12 - Front/Center/Rear Diff
1 - Front Chassis Brace
3mm x 16mm
2 - Wing
4mm x 16mm
4 - Front Hinge Pin Braces
4mm x 20mm
4 - Rear Hinge Pin Braces
8ight, 8ightXT, XT