The Lunsford Screw Touch:
- Grade 5 Titanium is roughly a 45% weight savings over steel.
- Always and only domestic Grade 5 (Ti-6Al-4V) Titanium
- Grade 5 fatigue strength is 530-630 (MPa). Grade 2 is 250.
- Grade 5 shear strength is 600-710 (MPa). Grade 2 is 270.
- Grade 5 tensile strength is 1000 to 1190. Grade 2 is 420.
- Grade 5 strength to weight is 50-56. Grade 2 is 28.
- Nano accurate broached head
- This provides a very accurate tool engagement/fitment with the head of the screw making for worry-free threading and unthreading. The broach is crafted in-house allowing us to give you ultra-consistency from screw to screw during the CNC process.
- Hand-fed thread rolling process
- A very smooth, zero tolerance and bur free thread rolling process aids in the preservation of the parts you are threading into.
- Machined from Made in the USA center-less ground titanium
- From raw material to the finished product, all of our Grade 5 titanium is born and bred in the USA.
- Manufactured right here in Albany, Oregon USA at the Lunsford compound.
- Our products are 100% USA sourced, produced, designed and developed.
What's Included:
Button Head Screws
3mm x 6mm
3 - Transponder
3 - Receiver Cover
3mm x 12mm
4 - Spindle
3mm x 14mm
4 - Body Posts
3mm x 16mm
1 - Drag Link
4 - Nerf Bars
4 - Hub Carrier
4mm x 10mm
4 - Front Top Plate
1 - Front Chassis Brace
1 - Center Chassis Brace
1 - Rear Chassis Brace
Cap Head Screws
3mm x 8mm
4 - Sway Bar Mounts
1 - Front Bumper
2 - Center Diff Cover
3mm x 10mm
2 - Motor
1 - Front Body Mount Support
1 - Rear Body Mount Support
3mm x 12mm
4 - Center Diff Mount
3mm x 14mm
4 - Front/Rear Gear Box Cover
2 - Front Shock Tower
2 - Rear Shock Tower
4 - Servo
3mm x 18mm
4 - Sway Bar
2 - Rear Bumper Mount
2 - Front Bumper Mount to Shock
4 - Lower Shock Mounts
3mm x 20mm
2 - Rear Outer Camber Links
4 - Front Camber Mounts
4 - Steering Links
Flat Head Screws
3mm x 8mm
3 - Wire Routing Guides
3mm x 10mm
2 - Steering Rack
3mm x 14mm
12 - Differentials
1 - Drag Link
3mm x 16mm
2 - C-Block
4 - Rear Bumper Mount Support
2 - B-Block
2 - Front Bumper
3mm x 40mm
2 - A-Block
2 - D-Block
4mm x 6mm
6 - Left side Guard
4mm x 15mm
2 - Motor Clamp
SCT4103